FUJIPLA PLUSTER PLS3310 SINGLE-SIDED LAMINATOR
PLUSTER PLS3310 Specifications:
◦ Manufacturer: Fujipla
◦ Laminating Speed: 13 feet/minute
◦ Temperature Range: 170 - 270°F
◦ Warm-Up Time: Approximately 5 minutes
◦ Maximum Laminating Thickness: 16mil
◦ Film Thickness: 1.2mil (One-sided application)
◦ Digital Sheet Sizes: Maximum 13-3/4" x 19-5/8", Minimum 11-13/16" x 17-5/8"
◦ Operation Panel: LCD displays for start, stop, temperature and speed settings
◦ Other Features: Laminated sheet counter, Film tension contorl, Roller gap lever, Automatic stop at end of film, Power saving mode, Emergency stop function.
◦ Power Consumption: 1400W
◦ Power Supply: AC 120V (60Hz)
◦ Net Weight: 330 Lbs.
◦ Warranty: Saddle Point Systems One Year Warranty (Manufacturer's Warranty for non-local customers)
SPS One Year Local Warranty covers:
◦ On-site installation and thorough training.
◦ All expenses for parts, labor and travel time.
◦ On-site service, typically by the next business day.
With the high volume Fujipla PLUSTER PLS3310, single sided lamination of digital prints is ushered into a new frontier of laminating efficiency. The PLS3310 is a powerhouse of a laminator, three times faster than its brother PLS3311 model, automatically feeding up to 900 sheets from its large feeding tray at an astounding speed of 13 feet per minute. The PLUSTER PLS3310 runs all OPP and Nylon based films that are extremely resilient glossy or matte rolls that resists water damage, scuffing and protects its contents from ultra violet light damage. Plus, if you need to trim your laminated page, you'll never experience de-lamination. This machine will laminate copy paper as heavy as 130# cover stock with a maximum sheet capacity of 13.75" x 19.625" and minimum sheet capacity of 11.8125" x 17.625". We highly recommend this superb system for anyone doing single sided lamination of 5,000 - 10,000+ pages per month. We want you completely satisfied with your purchase, which is why we include our Saddle Point Systems One Year Local Warranty for all Bay Area customers. Call us toll free at 855-880-7500 for a free consultation to see if the PLUSTER PLS3310 is a good fit for your business' lamination needs.
Availability: In Stock
New PLUSTER PLS3310: $39,995
Fujipla PLUSTER PLS3310 Videos
Extended Annual Performance Guarantee
When you purchase a new Fujipla PLUSTER PLS3310 high speed semi-automatic single sided lamiantor from us, we include our Saddle Point Systems One Year Local Warranty at no additional charge as described above.
Our San Francisco Bay Area customers can extend their service coverage to two years by purchasing our Saddle Point Systems Extended Performance Guarantee for their PLUSTER PLS3310 for just $4,000. In other words, you're paying for a one year service agreement and getting two years of complete coverage. Like our One Year SPS Warranty, our performance guarantee covers the cost of all parts, labor, travel time, on-site repair and, if requested, an annual preventative maintenance check to ensure your single sided laminator is running optimally. Simply give us a call and one of our technicians will come to your company, usually by the next business day, and service your machine at no additional charge.
After purchasing the Extended Annual Performance Guarantee, we'll e-mail you our Fujipla PLUSTER PLS3310 Service Agreement PDF (within one business day) for you to fill out. Then, either fax us a signed copy or mail us a signed hard copy to put the agreement in force. Annual service agreements must be purchased within 30 days of the original invoice date of your laminator and are not valid unless signed and on file with us.